
Tampa Cabinet Refacing
Cabinet Refacing in Tampa, FL
Cabinet refacing in Tampa, FL. New doors, veneer skins, and hardware over your existing boxes. Free estimates, no full teardown.
- 15+ Years local experience
- 500+ Projects completed
- Licensed & Insured
Serving Tampa and nearby communities.
Dated doors and worn finish don't always mean the boxes underneath are bad. If your cabinets are solid but tired, cabinet refacing swaps the doors, drawer fronts, and exposed surfaces while the structure stays put.
Tampa Cabinet Refacing handles this as its core service: veneer application over existing boxes, new doors fitted to your current layout, hardware to match. Works on the mid-century solid wood boxes still common in older Tampa homes and the early-2000s builder-grade boxes that make up a lot of the newer subdivisions.
What's included
What's Included
- Box assessment — every job starts with a check of hinge mounts, corner joints, and moisture exposure before anything is quoted
- Veneer and door matching — new surfaces are color and grain matched so the reface reads as one finish, not patched-in panels
- Drawer front replacement — fronts are swapped to match new doors, not just repainted
- Hardware fitting — hinges and pulls are set for the new door weight and profile, soft-close upgrades available
- Edge and seam finishing — exposed edges get banding so nothing looks raw once doors are off
Want a clearer scope?
Get a Free EstimateHow it works
How Our Cabinet Refacing Process Works
Step 1Cabinet Assessment
Existing cabinet boxes are inspected for structural soundness before refacing begins.
Step 2Design Consultation
Clients review finish and style samples to plan the new cabinet appearance.
Step 3Box Preparation
Surfaces are cleaned and lightly sanded to help new materials adhere properly.
Step 4Veneer Application
Matching veneer is applied to exposed cabinet surfaces for a smooth finish.
Step 5New Door Fitting
Replacement doors and drawer fronts are installed to complete the updated look.
Step 6Quality Check
Each cabinet is inspected for proper alignment, finish consistency, and smooth operation.
Materials
Materials and Methods for Cabinet Refacing
Material choice matters. Humidity and AC cycling put real stress on anything bonded to a cabinet box.

Rigid Thermofoil
A durable foil finish wraps cabinet surfaces for a smooth, consistent appearance. Holds up better against humidity swings than older PVC-based skins.

Wood Veneer
Natural wood veneer offers an authentic grain look over existing cabinet boxes. Good fit for mid-century solid wood boxes.

Adhesive Bonding Agents
Professional-grade adhesives ensure veneer and laminate stay securely bonded long-term, even through repeated humidity cycles.

Matching Drawer Fronts
New fronts are crafted to match replacement doors for a unified design.

Edge Banding
Edge banding finishes exposed panel edges for a clean, professional look.

Cabinet Hardware Sets
Coordinated hardware sets complete the refaced cabinetry with a polished finish.
Questions on materials?
Get a Free EstimateCost
What Does a Cabinet Refacing Cost in Tampa?
Price mostly comes down to door count, material tier, and whether hardware gets upgraded along the way. Call for an exact number. These are ballparks until we see the boxes.
| Project type | Typical range | What’s included |
|---|---|---|
| Entry-level laminate refacing | $3,500–$6,500 | stock laminate doors and standard hardware on a small to mid kitchen. |
| Mid-range wood veneer | $6,500–$11,000 | solid wood or veneer doors plus matched drawer fronts. |
| Full kitchen with soft-close hardware | $11,000–$18,000 | premium finishes, soft-close hinges and slides throughout. |
These are typical local ballparks — final cost depends on scope, materials, and site conditions. A free estimate gives you an accurate, itemized number for your home.
Want a number for your home?
Get a Free EstimateCodes & permits
Permits and Codes for Cabinet Refacing
Cosmetic refacing generally falls outside Hillsborough County's permit triggers. Verify with the city or county before scheduling if your job touches plumbing or electrical.
| Typically needs a permit | Often no permit |
|---|---|
| Any job that relocates plumbing lines behind the sink base | Door and drawer front replacement |
| Electrical rewiring for under-cabinet lighting changes | Veneer application over existing boxes |
| Work that alters structural wall framing around cabinetry | Hardware swaps and soft-close upgrades |
Need help with permits?
Get a Free EstimateDIY vs pro
DIY vs Hiring a Pro for Cabinet Refacing
| DIY | Hire a pro |
|---|---|
| Fine for a single drawer face or a hardware-only swap | Box prep and adhesion are what make veneer last, not just the material itself |
| Works if you're comfortable measuring hinge bores precisely | A pro catches hidden moisture damage before it's sealed under new material |
| Risky on full kitchens where door count and alignment stack up fast | Consistent alignment across a whole kitchen takes practiced hands |
Not sure DIY vs pro?
Get a Free EstimateBefore & after
Before and After Cabinet Refacing

Before 
After
FAQs
Cabinet Refacing FAQs
Is cabinet refacing actually cheaper than replacing cabinets?
Usually, yes. You're keeping the boxes, which is most of the material cost in a full replacement. Labor and new doors run well below a teardown-and-rebuild.
Does refacing work on particle board boxes or only solid wood?
It works on both, as long as the box isn't swollen or delaminating. Particle board boxes in good shape take veneer fine.
How messy is refacing, do I have to empty every cabinet?
You'll need to clear the cabinets being worked on, but it's not a demo job. No drywall dust, no plumbing disconnects unless something else is going on.
Can you match new doors to a kitchen with an unusual layout?
Every job starts with measuring your actual boxes, not stock dimensions.
How long before I can use my kitchen again?
Most full kitchens are back in use within a few days of install, see our timeline notes for specifics.
Next step
Get a Cabinet Refacing Estimate in Tampa
Call (656) 206-4829 or request a free estimate. We'll look at your boxes before quoting anything. Home · Contact · for a budget comparison also see Kitchen Cabinet Refacing.
More services
Other Cabinet Refacing services

Kitchen Cabinet Refacing
Kitchen cabinet refacing near me in Tampa, FL. Full-kitchen door, drawer, and veneer updates with free estimates.

Bathroom Vanity Refacing
Bathroom vanity refacing in Tampa, FL with moisture-resistant finishes built for shower steam. Free estimates available.

Cabinet Door Replacement
Cabinet door replacement in Tampa matches new doors to your existing boxes with precise fit, free estimates available.
Ask about Cabinet Refacing
Tell us about the project and how to reach you.